EMA Inc.

Yes, we STILL repair Stromag (Drivetronics) Drives

EMA is the only authorized distributor and service center in the USA for KEBA-LTi (LUST). We have been selling and servicing their drives for decades.  In 2001, LTI acquired Stromag Elektronik GmbH.  Stromag drives are found in Metal Fabricating Machines all over the globe.  EMA has seen a steady increase in Stromag drive repairs over the last few years especially since factory support has long since ended. 

Oftentimes, it is not economical to repair small AC drives in standard applications; however, because of the precise nature of a Stromag application, it is likely more economical to repair than it is to replace.  Retrofits in these types of applications are incredibly difficult, time consuming, and costly.  Repair is usually the only option when the drive is down and manufacturing has come to a halt.  EMA has successfully repaired Stromag drives, specifically the ADC, ADF, AER, and AKM series, in as little as 24-48 hours.  Our standard lead time is 10-15 business days and we provide a 6-month warranty on the entire drive (not just the parts replaced). 

EMA has been in the VFD industry for over 30 years.  Our technicians regularly travel the globe working on difficult applications and in even more difficult environments.  Our core business in the beginning was in-house repairs, particularly at the component level, and although we have expanded exponentially into the Medium Voltage Drive market (click here for more info), we have not forgotten where we started. We continue to provide our customers the best service when it comes to In-House repairs.

If you have Stromag, KEBA-LTi (LUST) drives at your facility, give us a call, shoot us an email, or click on the chat button to your right and an EMA representative will  advise the best solution for your situation. EMA offers free evaluations on all repairs so there’s no risk; send us your Stromag drive today. 

Let us prove to you that No One, ANYWHERE Is Better At Drives Than We Are!

One response to “Yes, we STILL repair Stromag (Drivetronics) Drives”

  1. Yong Li says:

    Greetings! My family’s company in China needs to replace parts of our Stromag AER 125.3 and two Stromag ADF 055.3/III (photos for my two Stromag machines are in this link: https://imgur.com/a/GaGJy5G). The 3 parts that are broken are 3 Marschner parts (photos for these 3 parts are in this link: https://imgur.com/a/bUbYGmn). Since the machines are far away from you, we would really appreciate it if we can purchase from you the 3 broken Marschner parts from you, or the Stromag AER 125.3 and Stromag ADF 055.3/III. Used parts are O.K! What do you have available for purchase? What is the price for each part?

    Thank you very much!

Leave a Reply

Your email address will not be published. Required fields are marked *